Optimize your industrial operations with our prefabricated steel and modular buildings. Engineered for warehouses, light factories, manufacturing facilities, and logistic centers, our industrial prefabricated solutions ensure rapid on-site assembly, durable structural performance, and flexible layouts tailored to operational needs. From design and production to installation, we provide end-to-end support for safe, efficient, and cost-effective industrial construction.
CCP wall panels are used as exterior wall panels, interior wall panels, floor panels, roof panels, and floor slabs, allowing for seamless construction of houses.
Compared with traditional cast-in-place construction, our low-rise prefabricated building system reduces overall construction time by over 40%, while maintaining high structural strength, durability, and long-term performance.
Get a Quote Now
Find the best solution for your project and check our detailed pricing table for guidance.
_1772095648_WNo_900d599.jpg)
_1772095905_WNo_900d600.jpg)
_1772096016_WNo_900d599.jpg)
_1772096217_WNo_900d599.jpg)
| For typical outdoor piper racks | Conventional welded steel pipe racks | Conventional bolted steel pipe racks | Modular steel pipe racks | S-CAS bolted steel pipe racks | |
| Construction Period | 100% | 80% | 60% | 30% | |
| Overall cost | 100% | 105% | 124% | 100% | |
| Cost break down | Manufacturing cost |
42% (Primer) |
64% (Primer, intermediate coat and topcoat) |
88% (Primer, intermediate coat and topcoat) |
72% (Powder coating integrating anti-corrosive and 2-hour-fire-resistance) |
| On-site painting cost |
16% (On-site intermediate coat and topcoat) |
9% (on-site partial repaint) |
6% (on-site partial repaint at the joint spots) |
2% (on-site partial repaint) |
|
| On-site installation cost |
42% (Welding cost) |
37% (Bolt connection) |
56% (Modular installation) |
26% (Bolt connection) |
|
| Coating service life | 3-5 years | 5-7 years | 5-7 years | 25-30 years | |
| Maintanance cost for future 30 years | 100% | 50% | 50% | 0%-2% | |
Engineered modular buildings for warehouses, factories, logistic centers, and light industrial facilities, combining efficiency, safety, and scalability
Prefabricated industrial warehouses designed for storage and logistics, offering 2–5 floors with flexible modular layouts and rapid assembly.
Modular industrial buildings for light manufacturing, providing 2–4 floors with high load capacity, adaptable layouts, and quick construction timelines.
Prefabricated multi-story logistic centers engineered for efficient material handling, offering 3–6 floors and modular bays to scale operations quickly.
Prefabricated industrial modules for temporary production lines, construction sites, or emergency storage, designed for fast assembly and structural safety.
Notes: Due to confidentiality agreements with our clients on most building projects, we are only able to showcase a selected number of low-rise prefabricated building designs. All displayed projects have been shared with full consent from our clients.
Low-cost worldwide shipping, 10-minute installation by anyone, rapid mass production capability
Our experienced engineers provide full technical support from building design and structural planning to component integration and on-site installation guidance.
Standardized prefabricated components and efficient coordination significantly shorten project timelines, helping you complete low-rise buildings faster and more reliably.
Factory-controlled production and standardized processes ensure consistent quality, structural accuracy, and long-term performance for every building project.
We support pilot projects, phased construction, customized layouts, and scalable supply, adapting to different project sizes and development stages.
Industrial prefabricated buildings are typically designed for 2–6 floors, depending on the operational requirements and structural load. Advanced engineering allows some multi-level warehouses or factories to reach up to 8 floors while maintaining safety and efficiency.
Absolutely. These structures are engineered for durability under industrial conditions. With proper design and installation, their service life can exceed 50 years, supporting heavy equipment and high operational loads.
Factory-made modules minimize on-site labor and assembly time. Structural installation can progress at 1–2 floors per week, reducing overall construction timelines by up to 40% compared with conventional methods.
Yes. Industrial modules can include pre-installed conduits, piping routes, and reserved openings for machinery, ventilation, and utilities, minimizing on-site errors and accelerating operational readiness.
Certainly. Floor plans, ceiling heights, column spacing, and facade configurations can be tailored to specific operational needs, code requirements, and local environmental conditions.
While prefabricated industrial buildings may have slightly higher material costs, overall project expenses are often lower due to reduced labor, shorter timelines, and minimized on-site disruptions.
Foundations typically include reinforced concrete raft slabs or pile-supported footings, depending on soil conditions and operational loads. Structural engineers determine the appropriate foundation for each project.
Yes. The modular design allows for horizontal or vertical expansion, interior adjustments, or functional upgrades with minimal impact on ongoing operations.
Properly engineered industrial prefabricated buildings comply with regional seismic and wind load standards. Structural calculations are adapted to ensure operational safety and stability under extreme conditions.
Yes. We provide detailed structural drawings, assembly manuals, and remote or on-site support to ensure accurate installation and smooth operational start-up for industrial prefabricated buildings.
